Alto MIXPACK Pro Portable 1000 Watt PA System

 Alto MIXPACK Pro Portable 1000 Watt PA System

 

1000 Watt portable sub/satellite PA system

15” subwoofer plus two satellites with 2 x 6.5" and 1 x 1.0" speakers

8-channel mixer with XLR, Line, and RCA inputs

3-band per channel EQ; Dual 7-band Master EQs

24-bit Alesis DSP with 256 total effects

Included speaker stands store conveniently within for transport


 

TECH INFORMATION

Type: 3-Way Powered System Bi-Amp plus passive crossover into satellite

Low Output Power: 230 Watts RMS Class AB

MID-HIGH-Output Power: 120 W + 120 Watts RMS Class AB

Peak Power Ratling: 1000 Watts Peak

Maximum SPL @ 1m: 119.5 dB Continuous - 122.5 dB Peak (calculated)

Frequency Response: 45 Hz - 20 kHz @ -10 dB

Impedance: Low-Mid/High Low 4 Ohm - Mid/high 8 Ohm

Crossover Frequencies: Active 125 Hz at 12 dB / Oct - Passive 3000 Hz at 12 dB / Oct with Electronic Dynamic Protections

Amplifier Protections: Low-Mid / High Soft start - Short Circuit - DC output voltage - Thermal Protection - Subsonic Filter at 30 Hz - 24 dB / Oct - Limiter / Compressor

Low Frequency Device: 15" / 385 mm - 2.5" Voice Coil

Mid Frequency Device: 4 × 6.5" / 165 mm - 1.5" Voice Coil

High Frequency Device: 2 × 1 "Compression Driver - 1" Voice Coil

Horn Coverage: 80° H × 80° V

Enclosure: Plastic Reinforced Cabinet Polypropylene


Mixer Section

Microphone Input: Electronically balanced discrete input configuration

Frequency Response: 10 Hz to 55 kHz +/-3 dB

Distortion (THD&N): 0.04% at +4 dBu 1 kHz

Gain: 35 dB

SNR (Signal to noise ratio): >94 dB

Line input: Electronically balanced

Frequency Response: 10 Hz to 55 kHz +/-3 dB

Distortion (THD&N): 0.04% at +4 dBu 1 kHz

Gain: 15 dB


Stereo input / Output

Line input: Unbalanced

Frequency Response: 10 Hz to 55 kHz +/-3 dB

Distortion (THD&N): 0.04% at +4 dBu 1 kHz


Impedances

Microphone Input: 1.4 kOhm

Channel insert retum: 2.5 kOhm

All other inputs: 10 kOhm or greater

Tape out: 1 kOhm

All other outputs: 120 ohm


Equalization

Hi shelving: ±15 dB @ 12 kHz

Mid bell: ±15 dB @ 2.5 kHz

Low shelving: ± 15 dB @ 80 Hz


Alesis DSP Section

A/D and D/A converters: 24-bit

DSP resolution: 24-bit

Type of effects: Hall, Room, Vocal & Plate Reverbs, Mono & Stereo Delay (max Delay Time 650ms), Chorus, Flanger & Reverb Modulations, Reverbs, Stereo Delay, Chorus, Reverb + Delay and Reverb + Chorus combinations.

Presets: 256

Controls: 16-position preset selector 16-position Variation selector


Controls & Monitoring

16-position preset selector

Clip LED

Mute Switch with LED indicator


Main Mix Section

Noise (Bus noise)

Fader 0 dB channels muted: -85dB (ref:+4dBu)

Fader 0 dB all input channels assigned and set to unity gain: -81 dBr (ref: +4 dBu)

Max output: 27 dBu balanced

Controls: 22 dBu balanced 1/4" jacks

AUX Sends: Max out 22 dBu

Power Supply: AC - 220 / 240 Volt or AC-100 / 120 Volt, with Switching Power Mode.


Dimensions (WxLxH): 1060mm x 700mm x 700mm

Weight: 111.8 lb