Alto TMX80 DFX

8-CHANNEL POWERED MIXER WITH EFFECTS

14 total inputs including 4 XLR jacks with phantom power, 8 Line jacks and stereo RCA

On-board digital effects processor and 3-shelf EQ on each mono and stereo channel

1400 Watt peak

Continuous 2 x 350 Watts at 4 O (2 x 180 W at 8 O) with thermal, short and voltage protections

48V phantom power

Input Channels

Mono channels: (Ch. 1 - Ch. 4)

Microphone Input: Electronically Balanced, discrete input configuration

Frequency Response: 20 Hz to 22 kHz, +/-1 dB

Distortion: (THD&N) ?0.005% At + 4 dBu, 1 kHz

Gain range: 0 dB to 50 dB (Mic)

Maximum Voltage Gain

70 dB Ch. Mic input ? Main Mix Out & Tape Out

80 dB Ch. Mic input ? Control Room & Phones

60 dB Ch. Mic input ? Aux Send

SNR (Signal to Noise Ratio): ?110 dBu

Phantom power (Mic Pin2/Pin3 And Pin1): +45 V ~ +49 V with switch control

Line Input

Electronically Balanced (SW to LINE)

Frequency Response: 20 Hz to 22 kHz, +/-1 dB

Distortion: (THD&N) ?0.005% at +4 dBu, 1 kHz

Gain range: 15 dBu to 35 dBu

Stereo channels: (Ch. 5 - 8)

Line Input: Electronically Balanced (SW to Line)

SNR: (Signal-to-Noise Rate ) ?110 dBu

Frequency Response: 20 Hz to 22 kHz, +/-1 dB

Distortion: (THD&N) ?0.005% At + 4dBu, 1 kHz

Gain range: -20 dBu to +20 dBu

60 dB Ch. Line ? Min Mix out

Maximum Voltage Gain

20 dB FX Return?Main Mix Out

20 dB RCA Tape Input?Main Mix Out

Impedance Microphone Input: 3.9 kOhms

All Other Input: 10 kOhms or Greater

Tape Out: 1 kOhms

All Other Outputs: 120 Ohms

Equalization

Mono channels

High ±15 dB @ 12 kHz

Mid ±15 dB @ 2.5 kHz

Low ±15 dB @ 80 Hz

Stereo channels

High ±15 dB @ 12 kHz

Mid ±15 dB @ 2.5 kHz

Low ±15 dB @ 80 Hz

Stereo Graphic EQ

±12 dB @ 16 kHz

±12 dB @ 8 kHz

±12 dB @ 4 kHz

±12 dB @ 2 kHz

±12 dB @ 1 kHz

±12 dB @ 500 Hz

±12 dB @ 250 Hz

±12 dB @ 125 Hz

±12 dB @ 63 Hz

DSP Section

A/D and D/A Converters: 24-bit

DSP Resolution: 24-bit

Type of effects: Echo, Echo + Verb, Tremolo, Plate, Chorus, Vocal, Rotary, Small Room, Flange Verb, Large Hall

Presets: 100

Controls: 100-position preset selector

Clip LED

Mute Switch

Foot Switch with LED indicator

Crosstalk Adjacent Input: ?-80 dB @ 1KHz (CH1-6)

Input to Output: ?-75 dB @ 1KHz (Stereo L/R,Ch.1-4, Pan: panned hard left or right)

Main Mix Section: Tape, Aux, Phones output output level 0 dBu Unbalanced, 1/4" jacks

Max out: +22 dBu Unbalanced, 1/4" Jacks

Main EQ (Option): +/-12dB @ 9 bands (63,125, 250 ,500, 1 k, 2 k, 4 k, 8 k,16 kHz)

Noise (Bus noise)

?-90 dB @ 20 Hz ~ 22 kHz (channel & Main level at 0 dB,other at minimum, DSP mute)

Electric Specification

Frequency Response: 20 Hz ~ 20 kHz

Output level: 0 dB

S/N Ratio: > 90 dB

Distortion (at 1 KHz): <0.05%

Power Section

SPK. Out Distortion (at 1 W & 1 kHz): <0.1%

Distortion (at 100 W & 1 kHz): <0.15%

Frequency Response (at 100 W): 20 Hz to 22 kHz, +/-2 dBu

SNR (Line In): ?100 dBu

Power continuous

1KHz, THD 1% " 2 X 350 W @ 4 O or 2 X 180 W @ 8 O Power EIAJ

1KHz, THD 1% 2 X 400 W @ 4 O or 2 X 200 W @ 8 O

Thermal protection: Over-temperature power limiting thermal shutdown

Temperature controlled 12V DC fan output

Short-circuit protection

Overload output protection

Over voltage protection

DC offset shutdown

Static Power

Consumption

No Output power state at 230 V ?32 W

100 VAC ~ 50/60 Hz

Power supply Main voltage 110-120 VAC~60 Hz

220 - 240 VAC ~ 50 Hz

100 V: T12 A 250 V

110 ~ 120 V: T12 A 250 V

220 ~ 240 V: T6.3 A 250 V

Dimensions (WxLxH): 304.5mm x 256mm x 74.5mm

Weight: 4.8 kg