Show PA-1000 PA-2000

* Low resistance(2O,4O,8O) output
* Fixed voltage(70V or 100V) output
* Banlanced XLR inputs,1/4"(6.3mm)TRS, and output barrier strip 2- speakon.
* Front panel LED indicators for signal and dip.
* Stereo(dual-channel) parallel-input, or bridged mono operating modes.

MODELPA1000PA-2000
Stereo mode
(both channels drive)
2O(EIAJ): 750Wx2 / 4O(Rms): 500Wx22O(EIAJ): 1500Wx2 / 4O(Rms): 1000Wx2
8O(Rms): 300Wx28O(Rms): 600Wx2
Bridge mono mode8O(Rms): 1000W / 4O(EIAJ): 1500W8O(Rms): 2000W / 4O(EIAJ): 3000W
Electrical specification
Input sensitivity (limit off)0.9-1.1V (0±1dBv)
Input impedance20KO balanced or 10KO unbalanced
Frequency response (at 10dB
below rated output power) 
20Hz~20KHz (+0-1dB)
Voltage gain33±0.05dB37±0.05dB
T.H.D.+N<0.05%
S/N rate>100dB
Crosstalk (1KHz)>70dB
Damping factor (1K8O)>500
Power / output circuitryswitching Power-Class ABswitching Power-Class 2H
General specifications
ProtectionsFull short circuit, oper circuit, thermal, ultrasonic, and RF protection stable into
 reactive or mismatched loads, turn ON/OFF, muting, tried crowbar.
ControlsFront: AC switch (soft-start), Input level control for each channel
Rear: stereo / parallel / bridged selector, limit ON/OFF selector
IndicatorsSignal: 2 green LED; Clip: 2 red LED; Power: 1 blue LED;
 Protection: 1 red LED; Bridge: 1 yellow LED; Parallel: 1 yellow LED
ConnectorsInput: active balanced XLR or TRS JACK; Output: "Touch-proof: binding posts
 and speak-on jacks
Power supplyAvailable for 80-135V or 160~270V AC 50/60Hz
Dimension (WxDxH)483 x 460 x 88.8 mm (19.02" x 18.11" x 3.5")
Weight (Approx.)9 kg (19.84 lb)11 kg (24.25 lb)