Show XMG-124CX

* Ultra low noise discrete MIC Preamps with +48V Phantom Power.
* Extremely high headroom offering more dynamic range.
* 4 MIC Input channels with XLRs and balanced Line Inputs.
* Insert I/O and Low Cut for MIC Input.
* 2 Stereo Input Channels with mono XLRs Input and TRS Jacks.
* 2 Stereo Input Channels with RCA Jacks and TRS Jacks.
* 4 Compressors
* 3-band EQ and Peak LEDs on each MIC Channels.
* 2-band EQ and Peak LEDs on Stereo channels.
* 1 AUX Send POST/PRE per channel for monitoring.
* 1 AUX Send POST Fader for external effects and monitoring.
* GRI/2 & Main L/R bus assign for each channel.
* 60mm Fader for Channel level and GR & Main Mix Level.
* 2-Track Input assignable to Main Mix or Control Room / Headphone Outputs.
* Balanced XLR&TRS outputs for Main MIX.
* Built in 24-bit DSP effect with 100 presets.
* Option MP3 player or Bluetooth player.
* Internal switch-mode power supply for maximum flexibility 100-240V.

MODEL                                                              XMG-124CX   
MONO INPUTMAIN MIX SECTION
Microphone input         Electronically balanced, XLR-FMax.output                             +22dBu un-balanced 1/4” jacks
Frequency response   10Hz to 55kHz, ±3dBAUX adjust range                 Off to +10dB
Distortion(THD+N)        <0.01% at +0dB, 22Hz~22kHzHum & Noise                          <-90dB@20Hz~22kHz, 1channel &
main level:0dB ,the other : minimum
Gain Range                  -10dB to -60dB
Phantom power           +48V with switch control                          Channel Crosstalk                <-80dB@0dB 20Hz~22kHz,
1channel &main level:0dB,
the other : minimum
STEREO INPUT  DSP SECTION
Gain range                      -10dB to -50dB   A/D and D/A converters        24bit
Max.input                              +22dB Type of effects                       Hall,room,vocal,plate,stereo,delay,
rev+delay, rev+chorus
SNR                               >90dBControls                                   100 preset selector; Mute switch &
Foot-switching & clip LED
Impedances                 line input: Electronically balancedUSB INTERFACE(OPTION)
Sensitivity range         +20dB to -20dBVersion                                    Fully complaint with USB1.1
Microphone input      1.5KOSample rate                           8KHz, 16KHz, 32KHz, 11.023KHz, 22.05KHz,44.1KHz and 48 KHz
All other input               10KO or greater / Tape out:1KODimension(WXDxH)             418 x 340 x 90mm(16.5” x 13.4” x 3.5”)
All other out                  120 O 



← Back