Related Products
Available at :
* 1" exit, neodymium magnet compression driver with 1.75" edgewound copper clad aluminium voice coil
* 40Wrms (AES standard) power handling and 110dB sensitivity
Designed with Sound Castle™ clamping to ensure uniform pressure on diaphragm assembly for reduced acoustic distortion
* One piece PETP film diaphragm and surround
* Advanced Finite Element Analysis (FEA) tools used to create a very light weight, high powered compression driver
8O Frequency Response
1. Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
2. Measured on axis at 1W, 1m, using typical horn, in 2p anechoic environment.
General
* Power rating (1) 40Wrms
* Nominal impedance 8 Ohm
* Frequency range 1200-20,000Hz
* Sensitivity (2) 110dB
* Recommended min. crossover (12dB/oct) 2200Hz
* Voice coil diameter 44mm/1.75in
* Voice coil material Edgewound copper clad aluminium
* Magnet type Neodymium
* Diaphragm material PETP film
* Surround material PETP film
Mounting Information
* Overall depth 55mm/2.2in
* Fitting Flange (4 x M6 holes on 76mm/3in PCD)
* Throat exit 25.4mm/1in
* Maximum width 88.5mm/3.48in
* Minimum width 82.0mm/3.23in
* Unit weight 0.65kg/1.4lb
Packed Dimensions & Weight
* Single pack size W x D x H 90mm x 90mm x 60mm
............................................../3.5in x 3.5in x 2.4in
* Single pack weight0.75kg/1.7lb
* Multi pack (16) size W x D x H500mm x 485mm x 110mm
.................................................../19.7in x 19.1in x 4.3in
* Multi pack (16) weight11.2kg/24.9lb
#