Related Products
Available at :
* 2" exit, ferrite magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 107dB sensitivity
* Patented phase plug design method suppresses cavity resonances at higher frequencies
* Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
* Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
* Rolled polyimide surround improves stiffness control, further lowering distortion
* Curved coherent wavefront, optimised for horn loading
8O Frequency Response
1. Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
2. Measured on axis at 1W, 1m, using typical horn, in 2p anechoic environment.
General
* Power rating (1) 75Wrms
* Nominal impedance 8O
* Frequency range 500-18,000Hz
* Sensitivity (2) 107dB
* Recommended min. crossover (12dB/oct) 800Hz
* Voice coil diameter 75mm/3in
* Voice coil material Edgewound copper clad aluminium
* Magnet type Ferrite
* Diaphragm material Titanium
* Surround material Titanium
Mounting Information
* Overall width 180mm/7.09in
* Overall depth 71mm/2.8in
* Fitting Flange (4 x M6 holes on 102mm/4.02inch PCD)
* Throat exit 50mm/2in
* Unit weight 4.8kg/10.6lb
Packed Dimensions & Weight
* Single pack size W x D x H214mm x 196mm x 82mm / 8.4in x 7.7in x 3.2in
* Single pack weight 5.1kg/11.2lb
#