Related Products
Available at :
Alto MIXPACK Express Ultra-Portable Powered PA System
350 Watts of continuous power
Lightweight, one-piece design for convenient transport
Two 10” speakers with cables included
Built-in mixer with seven-band graphic EQ and XLR, line and RCA inputs
Integrated Alesis DSP with 24-bit effects including reverb, delay and chorus
TECH INFORMATION
Mixer Section
Microphone/Line Input: Electronically balanced, discrele input configuration
Frequency Response: 10 Hz to 55 kHz, +/-3 dBu
Microphone Input Impedance: 3.9 kO
Line Input Impedance: 10kO
Microphone Input S/N ratio: >94 dBu
Microphone Inputs: Balanced XLR connectors
Line Inputs: Balanced / Unbalanced, 1/4' (6.3 mm) TRS jack connectors
Tape Inputs: Unbalanced RCA jack
Inputs Distortion (THD & N): 0.04% at 0 dBu, 1 kHz
Channel EQ High shelving: +/-15 dB @ 12 kHz Low shelving +/-15 dB @ 80 Hz
Aux Send: 1 with paths for DSP internal section, external DSP section and Monitor Out
DSP Section: 24-bit Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations
Master Section: Master Level knob, 4 LEDs level meter, 7-band graphic output EQ, and DSP Return level
Output Master EQ: 7-band, +/-5 dB @ 63Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, 16 kHz
Monitor Section: Master Level knob, 4 LEDs level meter, and 1/4" (6.3 mm) Monitor Out jack
Speaker Section
System Type 2-way coax vented box
Frequency Response 65 Hz - 20 kHz at -10 dB
Spherical horn Coverage 70° H × 70° V
Continuous Power 150 Watts AES Standard
Peak Power 300 Watts Peak
Protection Electronic circuit on driver
Speaker Specification 10" (254 mm) Low Frequency Driver / 2" (50.8 mm) Voice Coil, 1" (25.4 mm) Neodymium High
Input Connectors 1/4" (6.3 mm) mono (TS) jack on each cabinet
Amplifier Section
Output Power 350 Watts (EIAJ)
Impedance 4O
Protections Overload / Short Circuit / Soft Clip Limiter / Thermal Protection Fan Cooling
Standard Package
Two speaker cables
Power cord
One microphone cable
Stands: F-8 or F-3 not include
-
