Related Products
Available at :
Applications:
• Concert Sound Reinforcement
• Auditorium Installations
• Dance Clubs
• Houses of Worship
• Theatre and Film
• Corporate A/V
Frequency response 50Hz - 20KHz ± 4dB
Loudspeaker type Low Frequency 12" 305mm 8 Ohm High Frequency 50mm voice coil 16 Ohm; FerroCooled
HF Flare type Flat front Consistent Beamwidth
Size 610H x 405W x 410D, 7.5° taper to back
Weight 35Kg (80 lbs)
Dispersion Nominal 90° H x 40° V
Input Connector 3 pin Female XLR, polarity Pin 2 +, Pin 3 –, Pin 1 Ground
Input Impedance 44K Balanced (electronic)
Nominal input level 0dB for nominal rated amplifier outputs
Input Loop Connector 3 pin Male XLR, polarity Pin 2 +, Pin 3 –, Pin 1 Ground
Crossover Frequency 1500Hz
Crossover Type 24dB Linkwitz Riley Filter type
Highpass Filters –3dB @ 55Hz 24dB Linkwitz Riley plus switchable Sub/Full range response curves
Maximum SPL 130 peak, 127 continuous
Amplifier power LF 300 Watts RMS 8 ohms, 525 peak HF 150 Watts RMS 16 ohms, 300 peak
Amplifier type Lateral Mosfet
THD <.01%
Loudspeaker protection ISC amplifier anti-clipping circuitry
Relay muted input
Relay switched output sensing DC and RF error
Status LEDs AC power, HF Protect, LF Protect
AC Power 110V / 220V / 240V 50 / 60Hz
AC Power Input Neutrik PowerCon type NAC 3 FCA
AC Power Loop Neutrik PowerCon type NAC 3 FCB
AC Power protection User resettable external circuit breaker
AC Wattage Max 550 VA (550 Watts)
Transformer type Toroidal
Construction All premium grade void free multi-laminate plywood, with acid catalysed texture finish, steel mesh grille, top and bottom reinforced flying points and cable strain relief point
#
